3d printable quadcopter 3D for print
892 Views 0 Likes 0 Downloads Download
This is just another 3d printable quadcopter. Frame is designed to be strong.... Total weight is about 200g.
Most parts I've printed with 0.2mm layer height, 0.8mm wall and top/bottom thickness. 20% fill. Not all parts are oriented for the best position for printing, so you might need to adjust that.
- 4 x A2212-930KV brushless motor
- 4 X 20A SimonK ESC
- 1 x 11.1V 2200 mAh LiPo battery
- 1 x low voltage alarm indicator
...
- 1 x power distribution board for esc's
- 4 x M4x40 mm bolts
- 4 x M4x30 mm bolts
- 8 x M4 nuts
- M3 bolts from 10 to 16mm long.
- zip ties
- Optionally bluetooth adapter
- optionally RC transmitter
Designer
Edvardas3d model description
This is a 3D printable quadcopter frame. Finished frame weight is <200g.This is just another 3d printable quadcopter. Frame is designed to be strong.... Total weight is about 200g.
Most parts I've printed with 0.2mm layer height, 0.8mm wall and top/bottom thickness. 20% fill. Not all parts are oriented for the best position for printing, so you might need to adjust that.
3d model print parameters
Crius Multiwii SE 2.5- 4 x A2212-930KV brushless motor
- 4 X 20A SimonK ESC
- 1 x 11.1V 2200 mAh LiPo battery
- 1 x low voltage alarm indicator
...
- 1 x power distribution board for esc's
- 4 x M4x40 mm bolts
- 4 x M4x30 mm bolts
- 8 x M4 nuts
- M3 bolts from 10 to 16mm long.
- zip ties
- Optionally bluetooth adapter
- optionally RC transmitter
