Owl and earth ring 3D for print
907 Views 0 Likes 0 Downloads Download
NO SUPPORT NEEDED
layer thickness of 0.08 and speed of 30
We recommend not reducing the size due to the details of the figure. h...owever, in other materials or with a better definition it is possible to reduce the scale of the ring.
The dimensions of the gem are 17.33 wide and long; and 8.25 in height. This is to create and print it separately. You can also place small stones in the internal spaces (2mm high x 2mm wide x 20mm long).
We hope you like our participation.
Designer
QBKO3d model description
To participate in the #ANYCUBIC3D contest we designed a ring related to nature, simple and elegant. Like all of our designs, this particular one does ...not require supports (all inclinations less than 45 degrees). The concept of the ring is an owl with the earth inside and small diamonds under it to represent the mineral wealth. It is intended to be an engagement ring.3d model print parameters
Printing parameterNO SUPPORT NEEDED
layer thickness of 0.08 and speed of 30
We recommend not reducing the size due to the details of the figure. h...owever, in other materials or with a better definition it is possible to reduce the scale of the ring.
The dimensions of the gem are 17.33 wide and long; and 8.25 in height. This is to create and print it separately. You can also place small stones in the internal spaces (2mm high x 2mm wide x 20mm long).
We hope you like our participation.
