Dry erase board accessory holder 3D for print
1687 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I got tired of hunting for all this stuff every time I needed to use my... dry-erase board, so I designed this to keep it all together and in easy reach. I designed the bottoms of the cleaner bottle and eraser holders open so that if you drop push-pins, magnets, etc., they fall through instead of becoming an extraction problem.
Use the optional mods stl file as a modifier in Slic3r and s...et infill density for the mods to 100% to give extra strength around the screw holes.
Designer
Mark Rehorst3d model description
Holds eraser, up to 6 pens, and a bottle of cleaner for your dry-erase board.I got tired of hunting for all this stuff every time I needed to use my... dry-erase board, so I designed this to keep it all together and in easy reach. I designed the bottoms of the cleaner bottle and eraser holders open so that if you drop push-pins, magnets, etc., they fall through instead of becoming an extraction problem.
3d model print parameters
You'll need a little PLA filament to print it, and two screws to hold it on your wall.Use the optional mods stl file as a modifier in Slic3r and s...et infill density for the mods to 100% to give extra strength around the screw holes.
