Ducky the lop eared bunny 3D for print
681 Views 0 Likes 0 Downloads Download
...
Printed with Cyan PLA from Jet
Printed with support, 70 degree overhang angle
Printed with a ...brim, 20 lines
200 microns (0.2 mm layer height)
100% Scale
175 mm Height
20h 26m Print Time
0.8 mm Shell Thickness
6% Fill Density
90 mm/s Print Speed
0.3 mm Z hop when retracting
92 m of filament used
4 mm cut off object bottom
230C Print Temperature
Sliced with Cura
Modeled with ZBrush
Support and bottom cut off are a must when printing this model.
Designer
YEG 3D Printing3d model description
Designed in the memory of Ducky the Lop Eared Bunny. Modeled with ZBrush, he's as cute as he is plastic....
3d model print parameters
Printed on a Type A Machines 2014 Series 1 3D PrinterPrinted with Cyan PLA from Jet
Printed with support, 70 degree overhang angle
Printed with a ...brim, 20 lines
200 microns (0.2 mm layer height)
100% Scale
175 mm Height
20h 26m Print Time
0.8 mm Shell Thickness
6% Fill Density
90 mm/s Print Speed
0.3 mm Z hop when retracting
92 m of filament used
4 mm cut off object bottom
230C Print Temperature
Sliced with Cura
Modeled with ZBrush
Support and bottom cut off are a must when printing this model.
