This is a pair of earrings in the shape of an Easter bunny. Print them in your favourite color and material. I do recommend printing them slow. If you... have printed the model you can choose if you would like to upload a picture of your make. I would really love that!
Made with love by:
Raimon of IdeaLab
3d model print parameters
I have printed this model in Fillamentum luminous green PLA. And have used a 0.2mm layer height. My printspeed was 40mm/s. And i have used 18% infill.... I did use a skirt. I was printing with a 0.4mm nozzle on 210 degrees Celcius. I have used Cura for slicing.
3D file format: STL
3D model size: X 21 × Y 35 × Z 3 mm
Publication date: 2020/04/02 at 14:38