Easy pallet 3D for print
3635 Views 2 Likes 2 Downloads Download the piece here from 3dforprint
Any suggestions are welcome. Happy printing
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
150 microns
Infill:
50%
Filament_brand:
Hatchbox
...Filament_material:
PLA-Wood
Post-Printing
The wood filament I used was very stringy. The snaps may need to be cleaned up with a knife. Also if you want the pallet to stay together, leave a small amount of the string blob on the snap. The snap will usually break before it comes back out.
Designer
think3dprint3d model description
Easy pallet was made for fast and easy printing. Made with only 2 pieces, the pallet can be configured in many different ways. The snap fit planks mak...e for easy assembly with no glue required. There are 8 total different pieces for 16 possible pallet configurations. The wood filament makes the snaps weak if not pressed linearly. If strength is needed just scale, the clearances should still be right.Any suggestions are welcome. Happy printing
3d model print parameters
Printer brand:Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
150 microns
Infill:
50%
Filament_brand:
Hatchbox
...Filament_material:
PLA-Wood
Post-Printing
The wood filament I used was very stringy. The snaps may need to be cleaned up with a knife. Also if you want the pallet to stay together, leave a small amount of the string blob on the snap. The snap will usually break before it comes back out.
