Excavator 3D for print
1438 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
To get movable tracks, print them with flexible PLA. If you use standard PLA for the tracks, putting them ...in 60°C warm water helps mounting them (depends on the used filament).
For printing the tracks, brim should help to hold the printed parts on the build platform.As the axis for the track reels and the holes of the reels are concentric, a little bit of oil might help to mount the reels on the axis.
The fitting of the parts (especially the track reels on the axis) depends very much on the used filament and also the used print temperature. It might be necessary to adjust the size of the reels slightly with the slicer software after a first test print.
Support is necessary for the chassis and the first arm.
All in all printing the necessary parts isn't a big issue.
Have fun!!!! :-)
Designer
Sigi3d model description
A small toy excavator printed in 16 parts.To get movable tracks, print them with flexible PLA. If you use standard PLA for the tracks, putting them ...in 60°C warm water helps mounting them (depends on the used filament).
For printing the tracks, brim should help to hold the printed parts on the build platform.As the axis for the track reels and the holes of the reels are concentric, a little bit of oil might help to mount the reels on the axis.
The fitting of the parts (especially the track reels on the axis) depends very much on the used filament and also the used print temperature. It might be necessary to adjust the size of the reels slightly with the slicer software after a first test print.
Support is necessary for the chassis and the first arm.
All in all printing the necessary parts isn't a big issue.
Have fun!!!! :-)
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
