A quick design in F360. The original picture was found on the net somewhere.
Originally I was making these puzzles from plywood manually. With 3D p...rinting is too easy=)
3d model print parameters
Printer brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25 %
Notes:
Printed in PLA with 3 perimet...ers and 4 top/bottom solid layers. Layer height: 0.2 Infill: 25% I think there is enough play to print this model in one take al combined on any printer, but if you are not confident print every piece separately.