F22 raptor kit card 3D for print
5737 Views 3 Likes 3 Downloads Download the piece here from 3dforprint
The F22 Raptor is a 5th generation fighter jet with stealth capabilities, operated by the United States Air Force.
Pair it up alongside more USAF models!
C-130 Hercules X-15 V-22 Osprey F16 Fighting Falcon P-51D Mustang
3 versions of the kit are included. One with a hanging loop, another without, and the 3rd with a little helper brim for anybody who may have issues with the thin cockpit ends. Individual part files also included as always.
If printing individual parts be sure to print both intakes A and B as they are not identical!
Makes greatly appreciated, always happy to see them! :)
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament_brand:
Geeetech
...Filament_color:
White
Filament_material:
PLA
Notes:
It's a nice snap fit for me and my printer, results may vary! To tweak the tightness, simply increase or decrease the Z height in your slicer, otherwise a little glue can go a long way!
Designer
Peeto Skeeto3d model description
EDIT: I have added 2 more variants of the kit (looped and un-looped) with the main fuselage flipped round the right way. Should remedy any confusion, ...but keep in mind the very thin footprint at the rear!The F22 Raptor is a 5th generation fighter jet with stealth capabilities, operated by the United States Air Force.
Pair it up alongside more USAF models!
C-130 Hercules X-15 V-22 Osprey F16 Fighting Falcon P-51D Mustang
3 versions of the kit are included. One with a hanging loop, another without, and the 3rd with a little helper brim for anybody who may have issues with the thin cockpit ends. Individual part files also included as always.
If printing individual parts be sure to print both intakes A and B as they are not identical!
Makes greatly appreciated, always happy to see them! :)
3d model print parameters
Printer brand:Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament_brand:
Geeetech
...Filament_color:
White
Filament_material:
PLA
Notes:
It's a nice snap fit for me and my printer, results may vary! To tweak the tightness, simply increase or decrease the Z height in your slicer, otherwise a little glue can go a long way!
