Face mask head support 3D for print
2454 Views 1 Likes 36 Downloads Download
This piece allows the mask ...to be held in the back of the head so that continued use will be more comfortable.
The piece lacks homologation but has been tested by health personnel with good appreciation.
If the printing is done with flexible material, the piece can be used as soon as it is printed. In my case, I have printed the flat piece, so it needs to be shaped after a more detailed explanation in the printed 3D.
Nozzle at 195ºC
Bed at 70ºC
Speed 80mm/s
Layer height 0.25mm
Nozzle width 0.4mm
3D file format: STL
3D model size: X 120 × Y 3...3.2 × Z 2.5 mm
Designer
LIFVIT3d model description
Face masks are usually attached to the ears. Wearing masks for hours can cause discomfort and even marks behind the ears.This piece allows the mask ...to be held in the back of the head so that continued use will be more comfortable.
The piece lacks homologation but has been tested by health personnel with good appreciation.
If the printing is done with flexible material, the piece can be used as soon as it is printed. In my case, I have printed the flat piece, so it needs to be shaped after a more detailed explanation in the printed 3D.
3d model print parameters
PLA material.Nozzle at 195ºC
Bed at 70ºC
Speed 80mm/s
Layer height 0.25mm
Nozzle width 0.4mm
3D file format: STL
3D model size: X 120 × Y 3...3.2 × Z 2.5 mm
