Fallout 4 mini nuke - redicubricks 3D for print
2551 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
Here's a guestblog we wrote on the Ultimaker blog about the mini nuke: https://ultimaker.com/en/...blog/19397-designing-3d-printing-and-painting-the-fallout-4-mini-nuke
A mini nuke based on fallout 4 fat man ammo. requires no support, mostly snap fit. 183mm tall. Efficient design with minimal material use. Can be used as a planter. :D
Visit here for more pictures:
http://www.redicubricks.com/3d-printed-fallout-4-mini-nuke-cross-section/
This is the fully enclosed bomb shell, no cross section.
You can support us by purchasing a kit at http://shop3d.ca/product-category/print-to-order/ if you don't have your own printer.
PRINT SETTINGS
0% Infill on all parts except where specified.
~35 - 40mm/s
Use a brim on the thin parts if required.
If your printer can manage it, for best results:
frame_Detonator.stl
40 microns
25% infill
Frame_Top_arming.stl
60 microns
Frame _body_no_pegs.STL
90 microns
Designer
Valcrow3d model description
Printable, supportless, Mini Nuke Based on Fallout 4Here's a guestblog we wrote on the Ultimaker blog about the mini nuke: https://ultimaker.com/en/...blog/19397-designing-3d-printing-and-painting-the-fallout-4-mini-nuke
A mini nuke based on fallout 4 fat man ammo. requires no support, mostly snap fit. 183mm tall. Efficient design with minimal material use. Can be used as a planter. :D
Visit here for more pictures:
http://www.redicubricks.com/3d-printed-fallout-4-mini-nuke-cross-section/
This is the fully enclosed bomb shell, no cross section.
You can support us by purchasing a kit at http://shop3d.ca/product-category/print-to-order/ if you don't have your own printer.
PRINT SETTINGS
0% Infill on all parts except where specified.
~35 - 40mm/s
Use a brim on the thin parts if required.
If your printer can manage it, for best results:
frame_Detonator.stl
40 microns
25% infill
Frame_Top_arming.stl
60 microns
Frame _body_no_pegs.STL
90 microns
