Feather earrings set (two models) 3D for print
2922 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I...t was time to give pink filament a try. This is a set of feather-like earrings. Dimensions are: 18*38*3mm.
The download contains two models: a left and right feather.
Print 'em in your favourite color. If you like the model, consider posting a picture of your make (filament or resin it doesn't matter). I do recommend printing them very slow (20mm/s).
Enjoy!
Raimon of IdeaLab
I have printed this model with Fillamentum magenta PLA. I have used a 0.25mm layer height and 18% infill. I have used a skirt and my printspeed wa...s 18mm/s. I used a 0.4mm nozzle and my extruder was 210 degrees Celcius.
3D file format: STL
Publication date: 2020/09/07 at 12:20
Designer
The 3D models of IdeaLab3d model description
Note! I ended up printing this model at 10mm/s (printspeed for the 1st two layers) cause, it just for some reason wouldn't stick to the printbed.I...t was time to give pink filament a try. This is a set of feather-like earrings. Dimensions are: 18*38*3mm.
The download contains two models: a left and right feather.
Print 'em in your favourite color. If you like the model, consider posting a picture of your make (filament or resin it doesn't matter). I do recommend printing them very slow (20mm/s).
Enjoy!
Raimon of IdeaLab
3d model print parameters
I have printed this model with Fillamentum magenta PLA. I have used a 0.25mm layer height and 18% infill. I have used a skirt and my printspeed wa...s 18mm/s. I used a 0.4mm nozzle and my extruder was 210 degrees Celcius.
3D file format: STL
Publication date: 2020/09/07 at 12:20
