This is an adaptation of the model from: https://copper3d.com/hackthepandemic/
Designed for an Elder 3, it takes 44 grams of PLA and takes approximat...ely 8.5 hours (mask only).
I recommend reading the link specifications for proper use.
I also include a head harness for easy use.
This is an adaptation of the model from: https://copper3d.com/hackthepandemic/
Designed for an Elder 3, it takes 44 grams of PLA and takes approximately 8.5 hours (mask only).
I recommend reading the link specifications for proper use.
I also include a head harness for ease of use
3d model print parameters
Normally, I recommend a layer height of 0.2mm or 0.28mm, a filling of at least 20% with triangles.
Normally, I recommend a layer height of 0.2mm or 0....28mm, a filling of at least 20% with triangles.