Flexi mammoth 3D for print
1221 Views 1 Likes 0 Downloads Download
The model is PRINT-IN-PLACE type, in such a way that it does not require supports, it is articulated and it is printed completely assembled. Additionally, the model works as a cell phone stand
looking for more Cults selection flexi models?
FLEXI PRINT-IN-PLACE (No assembly)
No Supports (very important to disable them)
horizontal expansion = 0 (very important)
Layer Height = test...ed in 0.1, 0.2 & 0.3 mm
Wall Line Count = 3
Top/Bottom Thickness = 0.8 ~ 0.9mm (multiple of the layer height)
Infill = 20% appropriate
Print sped = 40 ~ 50
Retract at layer change = ON (recommended)
Z Hop When retracted = ON (recommended)
3D file format: STL
3D model size: X 68.1 × Y 130 × Z 44.7 mm
Publication date: 2021/02/22 at 18:53
Designer
The 3D models of kendofuji3d model description
His name is Mr. FIL and he is one of the co-workers of kumamoto. He is a mammoth fond of chess, so he usually stays up at night thinking of new strate...gies to improve his game, for that reason he can usually be found sleeping during office hours.The model is PRINT-IN-PLACE type, in such a way that it does not require supports, it is articulated and it is printed completely assembled. Additionally, the model works as a cell phone stand
looking for more Cults selection flexi models?
3d model print parameters
FLEXI PRINT-IN-PLACE (No assembly)
No Supports (very important to disable them)
horizontal expansion = 0 (very important)
Layer Height = test...ed in 0.1, 0.2 & 0.3 mm
Wall Line Count = 3
Top/Bottom Thickness = 0.8 ~ 0.9mm (multiple of the layer height)
Infill = 20% appropriate
Print sped = 40 ~ 50
Retract at layer change = ON (recommended)
Z Hop When retracted = ON (recommended)
3D file format: STL
3D model size: X 68.1 × Y 130 × Z 44.7 mm
Publication date: 2021/02/22 at 18:53
