Floating christmas light 3D for print
868 Views 0 Likes 0 Downloads Download
It floats on normal cooking oil. The four canals provide the wick with oil in a way that it is not supplied from below, but from the s...ide. In this way, the oil can be used up better.
- You can use any kind of container, vase, mug, bathtub...
- Fill it with three parts of water and one part of cooking oil.
- Put a wick (or a cotton cord) in the centre of the floating light.
- Put it on the oil and wait a minute.
- Light the wick an enjoy...
- No supports needed...
Designer
UbuntuBirdy3d model description
floating lightIt floats on normal cooking oil. The four canals provide the wick with oil in a way that it is not supplied from below, but from the s...ide. In this way, the oil can be used up better.
- You can use any kind of container, vase, mug, bathtub...
- Fill it with three parts of water and one part of cooking oil.
- Put a wick (or a cotton cord) in the centre of the floating light.
- Put it on the oil and wait a minute.
- Light the wick an enjoy...
3d model print parameters
- It gets warm in the worst case, not hot, so you can use PLA or whatever you like.- No supports needed...
