Flower earrings 3D for print
1795 Views 3 Likes 1 Downloads Download
This is a set of flower earrings. You can use earring hooks and rings imported from China (Aliexpres...s). Or you can choose to buy them from a local shop (more expensive, better for the environment because of ruduce in energy consumption (product travel distance)).
:)
Print them in your favourite color and material. I do recommend printing them slow. If you have printed the model you can choose if you would like to upload a picture of your make. I would really love that!
Made with love by:
Raimon of IdeaLab
I have printed this model in Fillamentum electric grey PLA. And have used a 0.25mm layer height. My printspeed was 10mm/s for the 1st two layers a...nd, 20mm/s for the other 9 layers (there are 11 layers at 0.25mm resolution). And i have used 18% infill. I did use a skirt. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. was printing with a 0.4mm nozzle on 210 degrees Celcius. I have used Cura for slicing.
3D file format: STL
3D model size: X 25 × Y 30 × Z 3 mm
Publication date: 2021/01/15 at 10:01
Designer
The 3D models of IdeaLab3d model description
I hope you're excited to print these earrings!This is a set of flower earrings. You can use earring hooks and rings imported from China (Aliexpres...s). Or you can choose to buy them from a local shop (more expensive, better for the environment because of ruduce in energy consumption (product travel distance)).
:)
Print them in your favourite color and material. I do recommend printing them slow. If you have printed the model you can choose if you would like to upload a picture of your make. I would really love that!
Made with love by:
Raimon of IdeaLab
3d model print parameters
I have printed this model in Fillamentum electric grey PLA. And have used a 0.25mm layer height. My printspeed was 10mm/s for the 1st two layers a...nd, 20mm/s for the other 9 layers (there are 11 layers at 0.25mm resolution). And i have used 18% infill. I did use a skirt. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. was printing with a 0.4mm nozzle on 210 degrees Celcius. I have used Cura for slicing.
3D file format: STL
3D model size: X 25 × Y 30 × Z 3 mm
Publication date: 2021/01/15 at 10:01
