Ford key fob - 3 and 4 button 3D for print
2735 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I own a 2005 Ford Freestar (3 button) and the key fob broke ...at the key ring area. I didn't have much luck with other snap together models already available so, I made my own screw together design. I can verify the internals from both the 3 and 4 button key fobs fit ok.
You'll need two m2 x 8mm screws to assemble.
Designed in Fusion 360, sliced in S3D.
Designer
Charles Mercer3d model description
Screw together key fob shell casing for some 2000's Ford trucks, vans, and probably carsI own a 2005 Ford Freestar (3 button) and the key fob broke ...at the key ring area. I didn't have much luck with other snap together models already available so, I made my own screw together design. I can verify the internals from both the 3 and 4 button key fobs fit ok.
You'll need two m2 x 8mm screws to assemble.
3d model print parameters
Printed at .3mm layer height in PETG @240c / 100c bed. Printed with one outer shell (since 100% infill anyway). I suppose you could use supports for t...he recessed holes in the top half of the case but I didn't need to.Designed in Fusion 360, sliced in S3D.
