Qi charging stand 3D for print
801 Views 0 Likes 0 Downloads Download
This is a stand designed for the PowerBot PB1020 Qi wireless charger. I particul...arly wanted it to hold a Nexus 5 cellphone, so the STL files are for that cellphone. It was designed particularly for a Nexus 5 in a Spigen Ultra Fit case (total thickness of 11 mm), though I have also created a STL file for a 13 mm thick phone/case combo. I would think that most Nexus 5 phone/case combos would fit within one of those two. If not, the OpenSCAD file is here, so you can modify as you see fit, as well as for other phones that are Qi compatible. The photos are of the 11 mm print.
Designer
excite3d model description
A charging stand to hold a cellphone and the PowerBot PB1020 chargerThis is a stand designed for the PowerBot PB1020 Qi wireless charger. I particul...arly wanted it to hold a Nexus 5 cellphone, so the STL files are for that cellphone. It was designed particularly for a Nexus 5 in a Spigen Ultra Fit case (total thickness of 11 mm), though I have also created a STL file for a 13 mm thick phone/case combo. I would think that most Nexus 5 phone/case combos would fit within one of those two. If not, the OpenSCAD file is here, so you can modify as you see fit, as well as for other phones that are Qi compatible. The photos are of the 11 mm print.
