Gear loot chest 3D for print
700 Views 1 Likes 0 Downloads Download
...
No supports needed. Print the lid pieces the geared faces down.
Assembly
You need 4 M3x14 bolts and nuts for the lid hinges if you use t...he knobs. If you leave the knobs out, M3x12 should be long enough.
Glue the lid halves together using the pins, put some glue on the knobs and screw them in the hinge holes. There are holes on the inside to hold the nuts.
If you don't like the knobs for opening the lid, you can leave them out. You can still easily open the chest pulling from the sides.
Designer
Jouni Ahola3d model description
Cool little decorative geared chest for storing your most precious loot....
3d model print parameters
PrintingNo supports needed. Print the lid pieces the geared faces down.
Assembly
You need 4 M3x14 bolts and nuts for the lid hinges if you use t...he knobs. If you leave the knobs out, M3x12 should be long enough.
Glue the lid halves together using the pins, put some glue on the knobs and screw them in the hinge holes. There are holes on the inside to hold the nuts.
If you don't like the knobs for opening the lid, you can leave them out. You can still easily open the chest pulling from the sides.
