Geared follow focus 3D for print
2498 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
After my gearless follow focus,
here a geared one.
Swapping the lens is not as easy as it ...is with the gearless one and you
need a lens-gear for every lens but you also need no pressure to create
friction.
The follow focus and lens gear are compatible with industry standard 0.8 pitch follow focus equipment.
The axis use 608 bearings to reduce any noise of threaded rods on
plastic that could be picked up by the microphone and to make this run
as smooth as possible.
The mounting is for an industry standard 15mm rail support system such as
my 3d printed shoulder rig:
thingiverse.com/thing:7278
With a follow focus you have precise, manual control over the focus (or zoom) of your lens.
It is used for professional filming where precise control of the focus
is required and where a pumping autofocus would simply ruin the take.
Commercial versions are sadly terribly expensive. :(
Photos:
picasaweb.google.com/Marcus.Wolschon/201105_201106_geared_follow_focus?feat=directlin
Blog post:
marcuswolschon.blogspot.com/2011/06/3d-printed-geared-follow-focus.html
Update: (2011-07-17)
Added lens_gear_version3 with a wider tap for the bolt.
Designer
Marcus Wolschon3d model description
After my gearless follow focus, here a geared one...After my gearless follow focus,
here a geared one.
Swapping the lens is not as easy as it ...is with the gearless one and you
need a lens-gear for every lens but you also need no pressure to create
friction.
The follow focus and lens gear are compatible with industry standard 0.8 pitch follow focus equipment.
The axis use 608 bearings to reduce any noise of threaded rods on
plastic that could be picked up by the microphone and to make this run
as smooth as possible.
The mounting is for an industry standard 15mm rail support system such as
my 3d printed shoulder rig:
thingiverse.com/thing:7278
With a follow focus you have precise, manual control over the focus (or zoom) of your lens.
It is used for professional filming where precise control of the focus
is required and where a pumping autofocus would simply ruin the take.
Commercial versions are sadly terribly expensive. :(
Photos:
picasaweb.google.com/Marcus.Wolschon/201105_201106_geared_follow_focus?feat=directlin
Blog post:
marcuswolschon.blogspot.com/2011/06/3d-printed-geared-follow-focus.html
Update: (2011-07-17)
Added lens_gear_version3 with a wider tap for the bolt.
