Ghost bat 3D for print
572 Views 0 Likes 0 Downloads Download
Remixed from our Bat models:
Vampire Bat: http://www.thingiverse.com/thing:1077037
Night Bat: http://www.thingiverse.com/thing:1092864
No
Supports:
Yes
Resolution:
250
Infill:
6%
Notes:
Orientation: From an upright position, rotate the model backwards 150 deg...rees for good and minimal support.
Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Real White PLA from 3D Solutech
Printed with support, 55 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
206 mm Width (8 inches)
6h Print Time
0.8 mm Shell Thickness
6% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
22.35 m of filament used
230C Print Temperature
Sliced with Cura
Modeled with Z Brush
Designer
YEG 3D Printing3d model description
Add Ghost Bat to your Halloween decorations this year. He is as scary as he is cool, with multiple loops along his spine and wings, you can hang him i...n multiple orientations. All you need is a push pin and some fishing line.Remixed from our Bat models:
Vampire Bat: http://www.thingiverse.com/thing:1077037
Night Bat: http://www.thingiverse.com/thing:1092864
3d model print parameters
Rafts:No
Supports:
Yes
Resolution:
250
Infill:
6%
Notes:
Orientation: From an upright position, rotate the model backwards 150 deg...rees for good and minimal support.
Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Real White PLA from 3D Solutech
Printed with support, 55 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
206 mm Width (8 inches)
6h Print Time
0.8 mm Shell Thickness
6% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
22.35 m of filament used
230C Print Temperature
Sliced with Cura
Modeled with Z Brush
