This design is inspired by a metal fidget spinner I found while cleaning around the house. It is a print-in-place spinner/display ...piece. In this multicolour filament, the contours of the design stand out and look well when the cube is spinning.
---2023/10/05---
Note:
Thanks to Mekopp,
Fixed cube model so it is flat on the buildplate when imported into the slicer.
—2023/10/12—
Note for people having slicer related issues:
Thanks to hobnoxious:
“A comment by evilinheaven on my make of this suggested that the Cura setting Slicing Tolerance may help with the welding of the moving parts. Try setting it to Exclusive instead of Middle. I'll report back when I've had a chance to reprint it.”
{Description}
The small size and short printing time make it ideal for trial 3D printing.
Print flat on any given face of the cube.
Print in Place with no supports.
Print at 30mm/s maximum.
Please take pictures of your Spin Cube and share them with us!
⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts.
If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.
If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.
In addition, debris from damage to the model may be accidentally ingested by infants or pets.
If the model is damaged, dispose of it immediately.
Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets.
Proper adherence to the precautions will ensure the safe use of the model.
3d model print parameters
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infil...l:
20% - Tri-Hexagon
Filament brand:
Sunlu
Filament color:
RGB Coextrusion
Filament material:
Silk PLA
Notes:
Layer Height: 0.1-0.3 mm
{Recommend}
Layer Height: 0.2
Print Speed: 25mm/s
Z Seam Alignment: User Specified
Z Seam Position: Back
Seam Corner Preference: Smart Hiding
Print flat on any given face of the cube
I would also recommend using a brim for adhesion while ensuring a nice base surface finish