Xi jinpooh 3D for print
73 Views 0 Likes 0 Downloads Download
If you want to sell physical prints of this objec...t or you simply want to support us there is a commercial version available here: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/xi-jinpooh-sell/
The model is scaled to be 10cm tall but you can scale it however you wish.
3D PRINTING SETTINGS
The download files contain a version that can be printed without supports on FDM printers and also a version that has oppression dripping from his hand that requires supports. But supports would make some parts of the prints nicer and safer to print (hands, face).
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
The version in the photos was printed from Fillamentum PLA Traffic Yellow.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This model was brought to life by 3Demon. We worked on this model with @jose_lh_3dart. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:
https://discord.com/invite/wHZ2xcgDbu
https://www.instagram.com/3demon3dprint/
https://www.reddit.com/user/3demonster
https://www.facebook.com/3Demon.3Dprint/
https://3d-mon.com/
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
15
Filament brand:
Fillamentum
Filament co...lor:
Traffic Yellow
Filament material:
PLA
Designer
3D-mon3d model description
This 3D model is a caricature of the Chinese President, Xi Jinping, enjoying his favourite thing.If you want to sell physical prints of this objec...t or you simply want to support us there is a commercial version available here: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/xi-jinpooh-sell/
The model is scaled to be 10cm tall but you can scale it however you wish.
3D PRINTING SETTINGS
The download files contain a version that can be printed without supports on FDM printers and also a version that has oppression dripping from his hand that requires supports. But supports would make some parts of the prints nicer and safer to print (hands, face).
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
The version in the photos was printed from Fillamentum PLA Traffic Yellow.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This model was brought to life by 3Demon. We worked on this model with @jose_lh_3dart. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here:
https://discord.com/invite/wHZ2xcgDbu
https://www.instagram.com/3demon3dprint/
https://www.reddit.com/user/3demonster
https://www.facebook.com/3Demon.3Dprint/
https://3d-mon.com/
3d model print parameters
Printer brand:Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
15
Filament brand:
Fillamentum
Filament co...lor:
Traffic Yellow
Filament material:
PLA
