Gyro the dodo - ultimaker special 3D for print
3836 Views 3 Likes 5 Downloads Download
The original dodecahedral kinetic sculpture by ...Virtox / Stijn van der Linden.
Now available for home printing!
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
A most intriguing and mesmerizing object.
Please respect the Creative Commons, Attribution, Non-commercial, No-derivatices license under which it is published. In simple terms: always show name of work and designer, for personal use only and no commercial use allowed of any kind!
Any digital distribution or publication must contain a copy of the CC license and this description.
Thank you for understanding!
If you'd like to purchase a printed edition, check out my shop:
https://www.shapeways.com/product/9945EZGR3/gyro-the-dodo
Model dimensions: 96.0 x 97.5 x 86.8 mm
Print time: 03d 01h 07m
Amount of material used: PLA Silver Metallic 70g / PVA 1...90g
Model weight: 59g
Print core temperature: 215 °C
Layer resolution: 100 micron
Print speed: 35 mm/s
Travel speed: 250 mm/s
Infill: 100%
Build plate temperature: 60 °C
Print cores used: AA 0.4 / BB 0.4
Designer
Stijn van der Linden3d model description
The original dodecahedral sculpture by Virtox / Stijn van der Linden now available for home printing.The original dodecahedral kinetic sculpture by ...Virtox / Stijn van der Linden.
Now available for home printing!
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
A most intriguing and mesmerizing object.
Please respect the Creative Commons, Attribution, Non-commercial, No-derivatices license under which it is published. In simple terms: always show name of work and designer, for personal use only and no commercial use allowed of any kind!
Any digital distribution or publication must contain a copy of the CC license and this description.
Thank you for understanding!
If you'd like to purchase a printed edition, check out my shop:
https://www.shapeways.com/product/9945EZGR3/gyro-the-dodo
3d model print parameters
Printed on an Ultimaker 3:Model dimensions: 96.0 x 97.5 x 86.8 mm
Print time: 03d 01h 07m
Amount of material used: PLA Silver Metallic 70g / PVA 1...90g
Model weight: 59g
Print core temperature: 215 °C
Layer resolution: 100 micron
Print speed: 35 mm/s
Travel speed: 250 mm/s
Infill: 100%
Build plate temperature: 60 °C
Print cores used: AA 0.4 / BB 0.4
