Halloween pumpkins 3D for print
4445 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The LED I use are those (is just a personal cho...ice):
http://www.ebay.de/itm/16-Stk-LED-Teelicht-Flammenlose-Elektrische-Teelichter-Kerze-mit-Batterie-/400585657588?hash=item5d44c40cf4:m:meWLhUp0o8jhSeDWoniPaqg.
Designed using Rhinoceros+Grasshopper and printed with an Ultimaker Original +
Hope you like it and enjoy Halloween!!
Print Settings
Rafts:
Yes
Supports:
Yes
Infill:
10
Notes:
Print it like on the *.stl files position: rotated 90° in the XZ Plane
Support: Touching Buildplate with 60° overhangs and 25-30% Infill
Brim: 15 Lines
Pumpkin: For me, 10% Infill worked out well
Designer
Javier Muñoz3d model description
This is a Halloween 3 Pumpkins printing set wich has a 28mm hole in the Bottom to adapt a LED candle.The LED I use are those (is just a personal cho...ice):
http://www.ebay.de/itm/16-Stk-LED-Teelicht-Flammenlose-Elektrische-Teelichter-Kerze-mit-Batterie-/400585657588?hash=item5d44c40cf4:m:meWLhUp0o8jhSeDWoniPaqg.
Designed using Rhinoceros+Grasshopper and printed with an Ultimaker Original +
Hope you like it and enjoy Halloween!!
Print Settings
Rafts:
Yes
Supports:
Yes
Infill:
10
Notes:
Print it like on the *.stl files position: rotated 90° in the XZ Plane
Support: Touching Buildplate with 60° overhangs and 25-30% Infill
Brim: 15 Lines
Pumpkin: For me, 10% Infill worked out well
