Parametric herringbone gear set for huxley extruder #30doc 3D for print
830 Views 0 Likes 0 Downloads Download
Originally shared June 2nd 2012-
Made for Day 2 of 30 days of Creativity #30DoC - www.30daysofcreativity.com/
More on my blog - www.richrap.blogspot.com
They are a little tricky to fit onto the extruder body, take your time and get the motor aligned first, fix the motor tightly, then tighten the hobbed bolt onto the large gear, fit washers and bearing and slide both the large motor into the body and at the same time the smaller gear onto the motor shaft, tighten up the smaller gear to the motor shaft.
Designer
Richard Horne3d model description
This is a set of herringbone gears using the SCAD Script from Triffid Hunter, but with settings for smaller Huxley (eMaker / RepRap Pro) extruders tha...t use M6 hobbed bolts and a Nema14 motor Enjoy perfect printing with Huxley.Originally shared June 2nd 2012-
Made for Day 2 of 30 days of Creativity #30DoC - www.30daysofcreativity.com/
More on my blog - www.richrap.blogspot.com
They are a little tricky to fit onto the extruder body, take your time and get the motor aligned first, fix the motor tightly, then tighten the hobbed bolt onto the large gear, fit washers and bearing and slide both the large motor into the body and at the same time the smaller gear onto the motor shaft, tighten up the smaller gear to the motor shaft.
