Hardcore nozzle changer 3D for print
3010 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This tool can be used to change the nozzle of the Ultimaker 3 without breaking anything.
...
It's only to be used with the HardCore from 3DSolex! Use at your own risks and with caution :)
Print it in one color (or dual if you want) and slide the tool provided with the Hardcore kit.
Depending on the material you may need to apply a bit of force to insert it.
Example in the picture was printed with Biofilla Platec and Colorfabb PLA/PHA (red).
Print with some infill (at least 15% and 3 shells).
26/02/2017
Added thin version that will print faster and easier in dual (no more vertical text).
Print on the back.
01/03/2017
Added even thinner version with a bit more tolerance for the tool hole
14/03/2017
Video to use the nozzle changer:
29/05/2017
Added design with larger trumpet insert
(Compatible with the previous logo model)
--> UltraThinMainBodyLargerTrumpet.stl
Designer
Didier Klein3d model description
Little tool to help the change of nozzle on the Ultimaker 3This tool can be used to change the nozzle of the Ultimaker 3 without breaking anything.
...
It's only to be used with the HardCore from 3DSolex! Use at your own risks and with caution :)
Print it in one color (or dual if you want) and slide the tool provided with the Hardcore kit.
Depending on the material you may need to apply a bit of force to insert it.
Example in the picture was printed with Biofilla Platec and Colorfabb PLA/PHA (red).
Print with some infill (at least 15% and 3 shells).
26/02/2017
Added thin version that will print faster and easier in dual (no more vertical text).
Print on the back.
01/03/2017
Added even thinner version with a bit more tolerance for the tool hole
14/03/2017
Video to use the nozzle changer:
29/05/2017
Added design with larger trumpet insert
(Compatible with the previous logo model)
--> UltraThinMainBodyLargerTrumpet.stl
