Valentine gears pin/pendant 3D for print
934 Views 0 Likes 0 Downloads Download
This set of working gears is fitted on a heart background (2"high x 1-3/4" at widest point). It was created in Tinkercad with some help getting started on the Geneva mechanism There are two bases, one without a loop that can be used as a pin (glue on a pin back from a crafts store) or just glued onto a blank card (best bet for giving to a guy). The other base has a loop so that the heart can function as a pendant. The gears are set in motion by turning the large gear on the upper right, which hangs over the base edge just enough for a finger to catch it.
Designer
TRAMGONCE3d model description
IMPROVED PINS!. While it is possible to get good results with a soldering iron, as suggested here, it's not easy! I've included a new photo to show my... progress from wonky to OK on my first practice heart using the soldering iron. It really demands a light touch.This set of working gears is fitted on a heart background (2"high x 1-3/4" at widest point). It was created in Tinkercad with some help getting started on the Geneva mechanism There are two bases, one without a loop that can be used as a pin (glue on a pin back from a crafts store) or just glued onto a blank card (best bet for giving to a guy). The other base has a loop so that the heart can function as a pendant. The gears are set in motion by turning the large gear on the upper right, which hangs over the base edge just enough for a finger to catch it.
