Heavy gun walker (torso option part) 3D for print
4155 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a torso option part for Heavy Gun Walker.
Arms, Legs and Heavy Gun parts are not included.
"Heavy Gun Walker" is re...quired.
https://cults3d.com/en/3d-model/gadget/heavy-gun-walker
Assemble instruction is in my youtube channel
https://youtu.be/jPIljk6czTw
Assemble instruction of Heavy Gun Walker Type-1 and 2
#1: https://youtu.be/1J26kTH7JZQ
#2: https://youtu.be/cPCZ0yARUYE
No extra parts needed, which are can't make with 3D printer such as metallic springs, bolts and etc.
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Cockpit might fit with 2" figures and Lego figures.
*Most of the parts can be disassembled for maintenance.
The object tested by FDM 3d printer with PLA and ABS filament
Layer height:
0.18mm
Shell count: 3
Fill density: 15~20%
Time to do: about 800 - 850 minutes
Technology: FDM
Material: PLA or ABS
...
Dimensions: about 95mm x 85mm x 115mm
Material Quantity: about 150g
3D file format: STL
Last update: 2021/01/31 at 07:59
Publication date: 2021/01/22 at 02:12
Designer
Jwoong3d model description
Printable Action FigureThis is a torso option part for Heavy Gun Walker.
Arms, Legs and Heavy Gun parts are not included.
"Heavy Gun Walker" is re...quired.
https://cults3d.com/en/3d-model/gadget/heavy-gun-walker
Assemble instruction is in my youtube channel
https://youtu.be/jPIljk6czTw
Assemble instruction of Heavy Gun Walker Type-1 and 2
#1: https://youtu.be/1J26kTH7JZQ
#2: https://youtu.be/cPCZ0yARUYE
No extra parts needed, which are can't make with 3D printer such as metallic springs, bolts and etc.
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Cockpit might fit with 2" figures and Lego figures.
*Most of the parts can be disassembled for maintenance.
The object tested by FDM 3d printer with PLA and ABS filament
3d model print parameters
Layer height:
0.18mm
Shell count: 3
Fill density: 15~20%
Time to do: about 800 - 850 minutes
Technology: FDM
Material: PLA or ABS
...
Dimensions: about 95mm x 85mm x 115mm
Material Quantity: about 150g
3D file format: STL
Last update: 2021/01/31 at 07:59
Publication date: 2021/01/22 at 02:12
