Hoist and brackets for grow lamps 3D for print
1980 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
Pulley system for raising and lowering grow lamps. If you don't have the same lamps ...as me (Sunblaster T5HO) you may need to adapt the struts. Alternatively the pulley system could probably be used for a variety of other tasks.
https://www.reddit.com/r/functionalprint/comments/d6wsru/hoist_and_brackets_for_grow_lamps/?utm_source=share&utm_medium=web2x
Hardware is all M4 screws or studs, with M6 studding used for suspending the pulley hanger bodies.
Fusion file is included (please excuse chaos therein). Refer to the assembly there or the images for the assembly.
Designer
mendel90owner3d model description
Double pulley system for raising and lowering grow lamps evenly.Pulley system for raising and lowering grow lamps. If you don't have the same lamps ...as me (Sunblaster T5HO) you may need to adapt the struts. Alternatively the pulley system could probably be used for a variety of other tasks.
https://www.reddit.com/r/functionalprint/comments/d6wsru/hoist_and_brackets_for_grow_lamps/?utm_source=share&utm_medium=web2x
3d model print parameters
Printed in PETG at .3mm layer height. Support was used on some of the parts, particularly the pulley hanger bodies, so they could be printed in a good... orientation to give the part some strength.Hardware is all M4 screws or studs, with M6 studding used for suspending the pulley hanger bodies.
Fusion file is included (please excuse chaos therein). Refer to the assembly there or the images for the assembly.
