3d model description
Loved the 2020 ornament, but wanted it on a classic 3D globe. The crown, clip, and hook are remixed from the Ornament Candy Dish.
I decided to prin...t out the globes in white ABS and the attachments in the more flexible PETG.
Included a blank globe for anyone who wanted to make a future remix.
Update Dec 6, 2020
Based on feedback, I have modified he designs to have much thinner walls. Did a few test prints and they print out just as well, but much faster.
4hr vs 7hr at .20mm layers
5hr vs 8hr at .16mm layers
6hr vs 9 hrs at .12mm layers
Update Dec 7, 2020
Added alternative versions with a flat bottom. This should eliminate the need for any supports.
Fixed a defect in the clip and hook.
3d model print parameters
Used ABS to allow for smoothing - though not much is needed at .12mm layers.
I do recommend adding a brim and supports to help the round globes stick the build plate. Internal supports should not be needed.
Supports: yes (touching build plate only)
Support angle: 60