Honeycomb ring 3D for print
1463 Views 2 Likes 2 Downloads Download
Recommended Setting:
- Layer Height 0.1 mm
- Infill 100...%
- Maximum Printing Speed 2600.0 mm/min
- Use Skirt or Rim to increase contact area with build plate (Skirt is more efficient and aesthetically better)
- Build Plate temp 105 c
- filament temp for ABS 220 c max (varies based on your filament)
Note: Print at the lowest possible speed, with open door and fan at max speed (especially if you are printing only one ring at a time)
Designer
EXFUSION3d model description
Honey Comb Ring part of a complete jewelry set containing earrings, necklace charm and a bangle (Remaining Items will be available for Download soon)...3d model print parameters
Ring can be re-sized uniformly to fit any finger size. current internal diameter is 14.2 mmRecommended Setting:
- Layer Height 0.1 mm
- Infill 100...%
- Maximum Printing Speed 2600.0 mm/min
- Use Skirt or Rim to increase contact area with build plate (Skirt is more efficient and aesthetically better)
- Build Plate temp 105 c
- filament temp for ABS 220 c max (varies based on your filament)
Note: Print at the lowest possible speed, with open door and fan at max speed (especially if you are printing only one ring at a time)
