Hooks for string shelves 3D for print
3446 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Hooks made for the iconic String shelves with Solidworks.
The part is slightly unsymmetrical because it makes it ...easier to sand the overhang.
Print the side with the least rounded edge on the bottom.
You'll need 4 parts per shelves and 4 screws per parts.
screw the parts on each corner of the shelf to keep the structure solid.
Designer
Emmynona3d model description
Hooks made for String shelves.Hooks made for the iconic String shelves with Solidworks.
The part is slightly unsymmetrical because it makes it ...easier to sand the overhang.
Print the side with the least rounded edge on the bottom.
You'll need 4 parts per shelves and 4 screws per parts.
screw the parts on each corner of the shelf to keep the structure solid.
