Housing parts for um2 flex3drive kit 3D for print
2463 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
These parts can be used together with a Flex3Drive k...it to build the Flex3Drive on an Ultimaker 2.
Please note that building a Flex3Drive onto an Ultimaker 2 is not an easy task. This is an upgrade for the handy tinkerer.
The draft installation manual was made by Korneel Bullens.
source code for firmware can be found on:
https://github.com/Ultimaker/Ultimaker2Marlin/tree/Flex3Drive
With thanks to Mutley3D who invented the Flex3Drive.
- Printed housing parts
- Flex3Drive firmware for UM2...
Designer
Bas van Deursen3d model description
These parts can be used together with a Flex3Drive kit to build a Flex3Drive onto an Ultimaker 2These parts can be used together with a Flex3Drive k...it to build the Flex3Drive on an Ultimaker 2.
Please note that building a Flex3Drive onto an Ultimaker 2 is not an easy task. This is an upgrade for the handy tinkerer.
The draft installation manual was made by Korneel Bullens.
source code for firmware can be found on:
https://github.com/Ultimaker/Ultimaker2Marlin/tree/Flex3Drive
With thanks to Mutley3D who invented the Flex3Drive.
3d model print parameters
- Flex3drive kit for UM2- Printed housing parts
- Flex3Drive firmware for UM2...
