Htc one dock 3D for print
2600 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a dock for the HTC One Smartphone with a simple and minimalistic design. Don't need to buy a 30$+ doc...k, just print this one.
There is an opening on the bottom for an usb cable.
Printed with 20% infill.
-The USB cable must be glued into the hole. Before doing that..., I had to remove the protective shell from the usb plug.
-I used a hot-glue gun to glue the cable into the dock.
Tip: Try out GCodeSimulator to check your print upfront
Homepage: http://www.dietzm.de/gcodesim/
Designer
GCodePrintr3d model description
A nice dock for the HTC One Smartphone.This is a dock for the HTC One Smartphone with a simple and minimalistic design. Don't need to buy a 30$+ doc...k, just print this one.
There is an opening on the bottom for an usb cable.
3d model print parameters
- printed with PLA but will work with other materials as wellPrinted with 20% infill.
-The USB cable must be glued into the hole. Before doing that..., I had to remove the protective shell from the usb plug.
-I used a hot-glue gun to glue the cable into the dock.
Tip: Try out GCodeSimulator to check your print upfront
Homepage: http://www.dietzm.de/gcodesim/
