Iv based this lamp on the one created on channel 4s supersize salvage. On the show they recycled an airbus a320 in to resalable furniture and novelty'...s. One of the creations was a desk lamp made from the planes seats that retailed for 700 pound. This lamp will be considerably less than 700 pound so print and enjoy.
3d model print parameters
Print the spacer plate, leg plate, body, spine and lampshade. Or print two front legs and two back legs, two spine spacers and two body spacers if you...r printer will not accommodate or you want different colours. You will require 3mm bolts and nuts of various lengths to attach every thing together. Refer to the pictures and to assembled.stl to show you where the various spacers go and which way to place the legs. Their is a channel running in the middle of the lamp to run cable to the lamp shade for you light. I used a 9v high powered smd I have included a frame for the smd. I have included supports for the body where needed so print that part with out rafts or supports enabled.