Icosaledron: a multi led smart ball 3D for print
2345 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
With twenty WS2812B LEDs (also known as Neopixels) positioned equally around, and a 3-axis accelerometer, the IcosaLEDron is a spherical platform for creating light effects based on accelerations applied to the ball. By creating the IcosaLEDron, we hope to excite makers and programmers to build there own, create and share custom codes, and help build a community of happy owners.
Visit our Instructables tutorial for much more information: http://www.instructables.com/id/IcosaLEDron-A-Multi-LED-Smart-Ball/
- rubber outer print with NinjaFlex Water (semi-transparent) thermoplastic elastomer (TPE) filament.
All part...s are printable flat side down and without supports. NinjaFlex may be difficult to use on some printers. To address this we have been experimenting with casting the piece in transparent rubber.
A complete set of instructions can be found on Instructables: http://www.instructables.com/id/IcosaLEDron-A-Multi-LED-Smart-Ball/
Designer
AfritLabs3d model description
What is an IcosaLEDron? It's a programmable, rechargeable 20 sided "ball" with a tri-color LED on each face. Inside is a custom PCB equipped with the ...Atmega328p and is Arduino compatible allowing for easy programming of different effects.With twenty WS2812B LEDs (also known as Neopixels) positioned equally around, and a 3-axis accelerometer, the IcosaLEDron is a spherical platform for creating light effects based on accelerations applied to the ball. By creating the IcosaLEDron, we hope to excite makers and programmers to build there own, create and share custom codes, and help build a community of happy owners.
Visit our Instructables tutorial for much more information: http://www.instructables.com/id/IcosaLEDron-A-Multi-LED-Smart-Ball/
3d model print parameters
- rigid plastic pieces in ABS or PLA- rubber outer print with NinjaFlex Water (semi-transparent) thermoplastic elastomer (TPE) filament.
All part...s are printable flat side down and without supports. NinjaFlex may be difficult to use on some printers. To address this we have been experimenting with casting the piece in transparent rubber.
A complete set of instructions can be found on Instructables: http://www.instructables.com/id/IcosaLEDron-A-Multi-LED-Smart-Ball/
