Ikea lamp headrest foot and phone mount adapter 3D for print
1736 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I had an old Ikea Tertial lamp with dents and stuff AND
I wanted a way to watch youtube in my bed.
It had to be very sturdy too. The ...extended arm is actually a lever.
Approach:
So, I designed a foot to jam between the headboard and the wall, with a block to put the lamp in.
Then, I made a custom adapter for the phone stand by Arron_mollet22 to fit where the actual lampholder was.
Bring your own:
- An Ikea Tertial Lamp
- It uses 2 M3x16mm bolts and nuts.
This is a remix from https://www.thingiverse.com/thing:398515
Notes:
I used PrusaSlicer and put a modifier in it to make the key strain portions 100% infill. Look at the screenshot in the PDF file or open the .3MF file directly in PrusaSlicer.
Lay the insert block on the side for maximum strength. (See screenshot)
No
Supports:
No
Resolution:
0.2
Infill:
50% + Modifiers blocks at 100%
Filament brand:
Prusament
Filament color:
Grey
Filament mate...rial:
PLA or PETG
Designer
KUPRISLABS3d model description
Design Goals:I had an old Ikea Tertial lamp with dents and stuff AND
I wanted a way to watch youtube in my bed.
It had to be very sturdy too. The ...extended arm is actually a lever.
Approach:
So, I designed a foot to jam between the headboard and the wall, with a block to put the lamp in.
Then, I made a custom adapter for the phone stand by Arron_mollet22 to fit where the actual lampholder was.
Bring your own:
- An Ikea Tertial Lamp
- It uses 2 M3x16mm bolts and nuts.
This is a remix from https://www.thingiverse.com/thing:398515
Notes:
I used PrusaSlicer and put a modifier in it to make the key strain portions 100% infill. Look at the screenshot in the PDF file or open the .3MF file directly in PrusaSlicer.
Lay the insert block on the side for maximum strength. (See screenshot)
3d model print parameters
Rafts:No
Supports:
No
Resolution:
0.2
Infill:
50% + Modifiers blocks at 100%
Filament brand:
Prusament
Filament color:
Grey
Filament mate...rial:
PLA or PETG
