Imperial general 3D for print
22039 Views 38 Likes 17 Downloads Download
Imperial Knight General, leading dozens of Knights is a terrifying experience for any Xeno forces which stand in its way. Engaging in front lines from where thunderous blasts of plasma could be heard and seen from miles. Its specialty in close combat is unparalleled among his ranks, wielding a two-handed power hammer, when fully powered its burst can vaporize armor of even larger titans.
This conversion contains components to build Questoris-class Knight, holding a two-handed hammer (arms are not posable, maybe little up and down), two plasma cannons forged by ancient smith Garin, are mounted on the carapace, two auto-cannons on the torso. Wearing big big cloak (hey why not), legs are made to be posed as right leg back and left front. (it won't fit other ways, can be moved little in mentioned direction). Only file that's hollowed is a hammer, but hip could be also hollowed(for saving some 3d materials, as plasma guns and hands), but I kept it solid because there would be just too many parts.
All files are inspected in meshmixer and ready for 3d printing. I plan to release one or two more conversions of this Knight soon. And add shield on a place of auto-cannon on the torso, posable hands with weapons and fists for this knight.
ALL PARTS FOR THIS KNIGHT ARE CUSTOM MADE AND HAVE DIFFERENT JOINTS AND SOCKETS IN COMPARISON TO REAL ONE.
Be free to send a request for it and I'll see what I can do. And happy printing:).
If you can spare a dime and Tip or Post a Make it would mean much support.
UPDATE (12.8.2019) - CARAPACE - AQUILA and ONLY AQUILA FOR CARAPACE
UPDATE (13.8.2019) - CARAPACE - WITHOUT PLASMA GUN HOLDERS
UPDATE (14.8.2019) - CARAPACE - SPLITED INTO 2 PARTS
UPDATE (22.8.2019) - NEW HEAD AND HEAD TOP REPLACED PREVIOUS ONES, NOW HEAD STAND HIGHER ( AESTHETIC REASON ONLY)
UPDATE (22.8.2019) - MODIFIED EXHAUST PIPES, PISTONS ON TOP ARE HIGHER BECAUSE SOME PHOTON USERS HAD DISTORTION ON IT. (OPTIONAL)
UPDATE (22.8.2019) - ADDED CAPE WHOLE. (TOO BIG FOR PRINT !) - FOR PERSONAL CUSTOMISATION AND CUTTING MESH
UPDATE (9.11.2019) - EXHAUST PIPES FIXED, PREVIOUS ONES REMOVED
Carapace Gun from https://www.thingiverse.com/thing:709740
Hammer from https://www.thingiverse.com/thing:2252029
Skull from https://www.thingiverse.com/thing:3273007
Copyright infringement is not intended. All parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way.
These models are for personal use as proxies and should never be sold. If it causes copyright issues, I will remove it.
Layer Height: 0.04. Bottom layer: 8
Exposure time: 9. Bottom Exposure: 90
Kelant Yellow. Layer Height: 0.04.Bottom layer: 5
Exposure... time: 6. Bottom Exposure: 15
Designer
YAEMHAY3d model description
In one of the Emperor's visions, he sensed immense power radiating from the distant world on the outer edge of Imperium. Months later Tech-priests arr...ived on the desolate planet and discovered the majestic hall deep under colossal ruins of a forgotten age. It contained a hundred statues of Questoris Knights standing upright in formations. In front of them there was a sight to behold, an ancient titan, kneeling and holding with one hand an enormous hammer positioned on a cracked floor. Its lifeless gaze directed on sign engraved on golden pillar „Quia Gloria et Honore“.Imperial Knight General, leading dozens of Knights is a terrifying experience for any Xeno forces which stand in its way. Engaging in front lines from where thunderous blasts of plasma could be heard and seen from miles. Its specialty in close combat is unparalleled among his ranks, wielding a two-handed power hammer, when fully powered its burst can vaporize armor of even larger titans.
This conversion contains components to build Questoris-class Knight, holding a two-handed hammer (arms are not posable, maybe little up and down), two plasma cannons forged by ancient smith Garin, are mounted on the carapace, two auto-cannons on the torso. Wearing big big cloak (hey why not), legs are made to be posed as right leg back and left front. (it won't fit other ways, can be moved little in mentioned direction). Only file that's hollowed is a hammer, but hip could be also hollowed(for saving some 3d materials, as plasma guns and hands), but I kept it solid because there would be just too many parts.
All files are inspected in meshmixer and ready for 3d printing. I plan to release one or two more conversions of this Knight soon. And add shield on a place of auto-cannon on the torso, posable hands with weapons and fists for this knight.
ALL PARTS FOR THIS KNIGHT ARE CUSTOM MADE AND HAVE DIFFERENT JOINTS AND SOCKETS IN COMPARISON TO REAL ONE.
Be free to send a request for it and I'll see what I can do. And happy printing:).
If you can spare a dime and Tip or Post a Make it would mean much support.
UPDATE (12.8.2019) - CARAPACE - AQUILA and ONLY AQUILA FOR CARAPACE
UPDATE (13.8.2019) - CARAPACE - WITHOUT PLASMA GUN HOLDERS
UPDATE (14.8.2019) - CARAPACE - SPLITED INTO 2 PARTS
UPDATE (22.8.2019) - NEW HEAD AND HEAD TOP REPLACED PREVIOUS ONES, NOW HEAD STAND HIGHER ( AESTHETIC REASON ONLY)
UPDATE (22.8.2019) - MODIFIED EXHAUST PIPES, PISTONS ON TOP ARE HIGHER BECAUSE SOME PHOTON USERS HAD DISTORTION ON IT. (OPTIONAL)
UPDATE (22.8.2019) - ADDED CAPE WHOLE. (TOO BIG FOR PRINT !) - FOR PERSONAL CUSTOMISATION AND CUTTING MESH
UPDATE (9.11.2019) - EXHAUST PIPES FIXED, PREVIOUS ONES REMOVED
Carapace Gun from https://www.thingiverse.com/thing:709740
Hammer from https://www.thingiverse.com/thing:2252029
Skull from https://www.thingiverse.com/thing:3273007
Copyright infringement is not intended. All parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way.
These models are for personal use as proxies and should never be sold. If it causes copyright issues, I will remove it.
3d model print parameters
Anycubic GreyLayer Height: 0.04. Bottom layer: 8
Exposure time: 9. Bottom Exposure: 90
Kelant Yellow. Layer Height: 0.04.Bottom layer: 5
Exposure... time: 6. Bottom Exposure: 15
