Inception top 3D for print
1383 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I have uploaded two top sizes. The larger is approximately 60mm high and
the smaller is app...roximately 40mm high. Both tops spin very well. The
larger one may spin a little bit longer because it has more mass. I
printed these with 25% fill, 0.2 layer height, No extra shells, with
Support (Min angle 60 deg, No Cross hatch).
I have added updated models that have hollow centers (Version 3). These seem to spin longer.
Designer
Michael Queally3d model description
This is the spinning top totem from the movie Inception.I have uploaded two top sizes. The larger is approximately 60mm high and
the smaller is app...roximately 40mm high. Both tops spin very well. The
larger one may spin a little bit longer because it has more mass. I
printed these with 25% fill, 0.2 layer height, No extra shells, with
Support (Min angle 60 deg, No Cross hatch).
I have added updated models that have hollow centers (Version 3). These seem to spin longer.
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
