Laser cut 3d print mash up
've only posted models for part of the tower .
The entire download is available for free after a simple email/newsletter ...registration at https://timeportalgames.com/wp/free-stuff/
see blog release at https://timeportalgames.com/wp/
This is a 3d print/ laser cut mash up. It is a 28mm fort/castle. It is totally component based allowing you to make a structure of any scale and dimension in regards to exterior contour. The fort pictured is only a proof-of-concept build and is not ment to amaze anyone. The total potential of this design is huge compared to what I am showing here.
This release is open source, it took a while because of all the parts but it really went fairly quick for me when you consider all the parts made, taking about a month of my sparse free time from start till end.
3d model print parameters
10% fills supports but no rafts needed
.3 layer hight
lasser cut notes
You can use any texture you want for laser cutting.Floors and catwalk are la...ser cut in one pass using 1/8th inch baltic birch ply . BMP images are raster engraved twice. Once with a half tone dither and once with no dither and a b/w threshold of 90 or so. Walls are laser engraved XLPE foam. It is laser engraved with a 40w laser at 100% speed and 75% power using a simple dither @250 DPI. It is important not to increase resolution higher as that actually doubles the cutting power of the laser.