28mm orc war machine 3D for print
955 Views 0 Likes 0 Downloads Download
Inspired by a vague war machine illust...ration on the old D&D Orcs of Thar cover. This model is designed for HIPS printing. It measures out at 12 inches when fully printed. This war machine is outfitted with a ballista and ram. It features a wind propelled gear for ground transport. 3/16 and 1/4 inch doll rods may be used for axles as I see no point in printing such things,
FInd more free models at https://timeportalgames.com
ASSEMBLY REQUIRED:Will likely require xacto blade, or sanding, and superglue to assemble. We advise the following settings for slicing
Layer height: .3mm
auto_support: HIPS Support through Makerware
Fill Density: 10% or greater
Many free designs available at
https://timeportalgames.com/
Designer
Jeremy Gosser3d model description
A 28mm Orc war fortress inspired by a small vague illustraion of a war machine on the Orc's of Thar cover.Inspired by a vague war machine illust...ration on the old D&D Orcs of Thar cover. This model is designed for HIPS printing. It measures out at 12 inches when fully printed. This war machine is outfitted with a ballista and ram. It features a wind propelled gear for ground transport. 3/16 and 1/4 inch doll rods may be used for axles as I see no point in printing such things,
FInd more free models at https://timeportalgames.com
ASSEMBLY REQUIRED:Will likely require xacto blade, or sanding, and superglue to assemble. We advise the following settings for slicing
Layer height: .3mm
auto_support: HIPS Support through Makerware
Fill Density: 10% or greater
Many free designs available at
https://timeportalgames.com/
