Ipad 3 / 4 wall mount 3D for print
2038 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a small wall mount for the iPad 3 / 4.
This can be best printed on his side, with just the quick print... settings in Cura.
You can mount the wall mount on a standard 80 x 80 wall box where you normally would put a switch or electric socket.
A small gap is provided to route any cables.
The provided gcode file is for a Ultimaker 2. I used that on for the print shown on the photo.
Btw, the dashboard shown is from the Fibaro for iPad app.
Have fun and share your prints!
Designer
Wilco Niessen3d model description
A slick small iPad 3 / 4 Wall mountThis is a small wall mount for the iPad 3 / 4.
This can be best printed on his side, with just the quick print... settings in Cura.
You can mount the wall mount on a standard 80 x 80 wall box where you normally would put a switch or electric socket.
A small gap is provided to route any cables.
The provided gcode file is for a Ultimaker 2. I used that on for the print shown on the photo.
Btw, the dashboard shown is from the Fibaro for iPad app.
Have fun and share your prints!
