Large scale divers watch desk clock 3D for print
1213 Views 0 Likes 1 Downloads Download
your dreams have been answered!
However, this little project isn't for the faint h...earted!
131 individual parts (or thereabouts).
30 hours printing time - approx @ 0.2mm
(0.1 recommended).
50 metres of filament @ 3mm dia.
400g weight (approx)
This project will require model making skills and lots of patients!
Ideally, all parts should be printed at 0.1 or higher if possible and some fine tuning will be required to make parts fit.
Printed on the MB Rep 2 and Ultimaker 2 using PLA.
Fully detailed printing spec and assembly instructions included.
Enjoy!
Designer
francfalco3d model description
If you ever wanted a really massive divers watch desk clock -your dreams have been answered!
However, this little project isn't for the faint h...earted!
131 individual parts (or thereabouts).
30 hours printing time - approx @ 0.2mm
(0.1 recommended).
50 metres of filament @ 3mm dia.
400g weight (approx)
This project will require model making skills and lots of patients!
Ideally, all parts should be printed at 0.1 or higher if possible and some fine tuning will be required to make parts fit.
Printed on the MB Rep 2 and Ultimaker 2 using PLA.
Fully detailed printing spec and assembly instructions included.
Enjoy!
![Apple Watch Band [Ninjaflex]](https://www.3dforprint.com/modelos/5341/apple-watch-band-ninjaflex1_medium.jpg)
