IM NOT 100% SURE IF THIS FILE IS STILL ANY GOOD, PLEASE LETT ME KNOW IF U PRINTED IT AFTER 2019 SO I CAN UPDATE THIS TEXT TO STILL WORKING.
ALSO U CA...N NOW REMIX IT IF YOU WANT.
Working Turbo Fantilator v1.0- Scale Working Model by KimboCake.
Update v1.1: Uploaded an Airfilter, and an exhaust system, working with 2 m3 bolts and nuts. Exhaust is in 3 parts, part 3 is not really needed,only if u want it, u can even print part 2 and 3 multiple times, depends on how big and long u want the exhaust to be.
As for the battery, you could use anything as long as the voltage is between 6 and 12v.
I had this old RC battery laying around for years, its a 7.4v 800mhz battery.
The electric motor that powers it is a 6v / 12 V 24000rpm brushed motor.
Shaft Size : 1.5mm
Motor Body Length : 19.4mm/ Width : 14.8mm/ Height : 10.8mm
Print Settings
Printer Brand: Gembird i3
Printer: Prusa i3
Rafts: Brim (not necessary)
Supports: Yes, not all parts tho.
Resolution: .2mm
Infill: 30%
Notes:
Recommended to print the turbo housing, turbo mid, and turbo exhaust on highest quality for better looks.
Please do not steal my design, and give credits to me.
Tips are welcome, but not necessary. Feel free.
This project might get more
Print Settings
Printer brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30
Notes:
I recommend setting higher settings for the Turbo housing, exhaust and middle parts for better looks. Have