Iris aperture 3D for print
1224 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
A semi-parametric aperture that I drew in SolidWorks to practice modeling. Based off of, but not... copying from, several other irising boxes. As printed on an inkjet-binder printer, the assembly fits together and moves quite well with a bit of grease. I left reasonable tolerance on every joint except for the sliding among leaves, which shouldn't be a problem. When the aperture is open, it does not leave an entirely empty circle in the middle -- I sacrificed that to make it look better as it opens.
Designer
Adam Selker3d model description
An irising apterture, controlled by a rotating ring.A semi-parametric aperture that I drew in SolidWorks to practice modeling. Based off of, but not... copying from, several other irising boxes. As printed on an inkjet-binder printer, the assembly fits together and moves quite well with a bit of grease. I left reasonable tolerance on every joint except for the sliding among leaves, which shouldn't be a problem. When the aperture is open, it does not leave an entirely empty circle in the middle -- I sacrificed that to make it look better as it opens.
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
