Iron man arc reactor 3D for print
2193 Views 0 Likes 4 Downloads Download
I was asked to upload these files, so here they are:)
...
I recommend to first put the 10 coils on the Led_ring with whatever kind of wire you want. Maybe even glue them on. After that put the leds in the Led_ring, then put the Disk over the the LEDs, and solder the resistors to the LEDs. After this you can put the LEDs into Led_core and glue this to the Disk.
From now on assembly should be straight forward, with the use of superglue you should be able to complete the model!
For a cool 'Afterglow' effect, Print the Led_ring, Disk and Led_core with glow-in-the-dark plastic.
There's space for a 9 volt battery block in the Lower_frame. I use it with a 9 volt wall adapter, because i use it as a night light!
- Resistors
- Superglue...
Designer
Timo3d model description
Based on the arc reactor Pepper used for the ‘Proof that Tony Stark has a heart’ piece.I was asked to upload these files, so here they are:)
...
I recommend to first put the 10 coils on the Led_ring with whatever kind of wire you want. Maybe even glue them on. After that put the leds in the Led_ring, then put the Disk over the the LEDs, and solder the resistors to the LEDs. After this you can put the LEDs into Led_core and glue this to the Disk.
From now on assembly should be straight forward, with the use of superglue you should be able to complete the model!
For a cool 'Afterglow' effect, Print the Led_ring, Disk and Led_core with glow-in-the-dark plastic.
There's space for a 9 volt battery block in the Lower_frame. I use it with a 9 volt wall adapter, because i use it as a night light!
3d model print parameters
30x5mm Led white- Resistors
- Superglue...
