Large magnets
6x3mm cylinder magnets
Strongest and most reliable click.
Small magnets
3x3mm cylinde...r magnets
Soft click with an optional middle setting.
No magnets
No hardware required
Depending on your printer's calibration and the filament you use, this will provide a click of variable stiffness.
No magnets V2
No hardware required, stays clicky longer
Depending on your printer's calibration and the filament you use, this will provide a click of variable stiffness.
8x3mm magnets
8x3mm cylinder magnets
10x3mm magnets
10x3mm cylinder magnets
Printing
This model is very small and requires accurately printed clearances to work as expected.
Print slowly and avoid brittle or inconsistent filaments.
Assembly
If assembling one of the magnet versions of this fidget, press fit the magnets into the button and bottom case first. Make sure magnets are oriented to pull the button toward the bottom case. If the magnets are loose, glue them in.
The top and bottom pieces snap together. These snaps are very tight, so they may require some force to work.
Gluing the case shut is not recommended. If you do glue the case together, limit the glue to only the ends of the case. This is particularly important if you're printing the no-magnet version, as the case needs to flex slightly at the middle.