Jansjö lampshade 3D for print
3057 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a small lampshade for the Ikea Jansjö lamp which snaps onto the head and rests there pulled down by gra...vity. You can print it with different colors for different moods.
I have attached Cura 2.3.0 profiles for the Ultimaker 2+ and the Ultimaker 3.
Designer
Stefan Nicolin3d model description
Small lampshade for the Jansjö lampThis is a small lampshade for the Ikea Jansjö lamp which snaps onto the head and rests there pulled down by gra...vity. You can print it with different colors for different moods.
3d model print parameters
Print this with the "spiralize" option turned on. You'd need a fairly well leveled printer because the first layer doesn't have a lot of contact to th...e heated bed. You might use a bit of hairspray to improve adhesion or print with a brim (although a brim is ugly and hard to remove).I have attached Cura 2.3.0 profiles for the Ultimaker 2+ and the Ultimaker 3.
