Japanese centerpiece lanterns for wedding 3D for print
3667 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
These Japanese styled lanterns were designed as centerpieces & table n...umbers for a friend’s wedding. Battery powered fairy lights were placed in each lantern to illuminate them for the event. 16 centerpieces consisting of 96 individual parts were printed using 4 Ultimaker’s, all printing 24/7 for a full week!
The lanterns print in four main parts:
Frame - Designed to print without supports, prints in 8.5 hours at 0.2 layer height, 15% infill, and 2 shells
Lid - Fills entire bed of UM2+, prints in 7 hours at 0.2 layer height, 15% infill, 2 shells
Insert - Use Spiralize (Vase) mode in Cura, print using natural PLA or a clear filament like T-Glase
Numbers (optional) - printed separately and then glued to the insert
To customize the windows in your own lantern, download the CAD assembly from Fusion360 Gallery or GrabCAD.
Designer
Sam Welch3d model description
Japanese inspired centerpieces & table numbers designed for a friends wedding.These Japanese styled lanterns were designed as centerpieces & table n...umbers for a friend’s wedding. Battery powered fairy lights were placed in each lantern to illuminate them for the event. 16 centerpieces consisting of 96 individual parts were printed using 4 Ultimaker’s, all printing 24/7 for a full week!
The lanterns print in four main parts:
Frame - Designed to print without supports, prints in 8.5 hours at 0.2 layer height, 15% infill, and 2 shells
Lid - Fills entire bed of UM2+, prints in 7 hours at 0.2 layer height, 15% infill, 2 shells
Insert - Use Spiralize (Vase) mode in Cura, print using natural PLA or a clear filament like T-Glase
Numbers (optional) - printed separately and then glued to the insert
To customize the windows in your own lantern, download the CAD assembly from Fusion360 Gallery or GrabCAD.
